Login/Create an Account
The Subaru Outback was a station wagon that first launched in 1994 and was a variant of the second generation Subaru Legacy. In 1994, Subaru offered the Legacy wagon with a flat-roof variant and that became the first generation Outback. In 1996, the Outback was known as the Legacy Outback but the legacy moniker was dropped in Australia when it was launched and other markets followed soon after.
Driving your vehicle without any paint protection film is a dangerous affair. There are many different things that can damage the paint of your vehicle and will do so eventually. That is why you should take the precautions now and prevent it from happening before it is too late. The film comes with self- healing technology that will heal small scratches or damages over time and keep the vehicle and the paint looking new. And it is a much cheaper alternative to getting a paint job every time your paint gets damaged.
The first generation of Subaru Outback was launched in 1994 and used the Subaru legacy second generation as the basis. Customers weren't able to change much with the legacy and most of the changes were cosmetic. It came equipped with the 2.2L EJ22 engine, the same one used in the Legacy.
If you want to fully wrap your first generation Subaru Outback, then you will need 15.6 yards of paint protection film. That does not include the windows, wheels, or the lights. A partial wrap will require 5.2 yards of film and covers one side of the vehicle or the roof.
The second generation of Subaru Outback made its debut in 1998 and was released in the U.S. in 1999 as a 2000 model year. It was a slightly altered third generation version of the Legacy that was released at the same time as the Legacy SUS became the Outback. A new 3.0-liter EZ30 was introduced and it was the first Subaru six-cylinder engine not used in its sport car lines.
The second generation of Subaru Outback can be fully wrapped with 15.6 yards of paint protection film. That is excluding the windows, wheels, and the lights of the vehicle. For a partial wrap, you will need 5.2 yards of film and that is able to cover the side of the vehicle or the roof.
The third generation of Subaru Outback was shown at the Frankfurt Motor Show in 2003 and in North America in 2004 as a 2005 model year. It was based in the fourth generation Legacy model and came with the 2.5-liter EJ25 or the 3.0-liter EZ30 engine as customers were able to choose between them. The Outback sedan was discontinued after the 2007 model year from North American as it has only been limited to that market.
You can completely wrap your third gen Subaru Outback with 15.6 yards of paint protection film. That doesn't include the windows, wheels, or the lights of the vehicle. If you want to do a partial wrap, then we recommend 5.2 yards of film and that is able to cover a side of the vehicle or the roof so buy accordingly.
The fourth generation of Subaru Outback was released in 2009 as a 2010 mode year and was marketed as the Outback worldwide. Just like every Outback model, it was based on the latest generation of Legacy vehicle that was released at the same time. The new Outback was a bit wider and taller but the length was slightly reduced. A new .6-liter EZ36 replaced the EX30 engine, adding increased power and offered increased displacement with the same exterior dimensions.
If you plan on fully wrapping your fourth generation Subaru Outback, then you will need yards 15.6 yards of paint protection film. That is excluding the windows, lights, and the wheels of the vehicle. A partial wrap will require 5.2 yard of film and is able to cover the length of the vehicle or the roof.
The fifth generation of Subaru Outback made its debut in 2014 as the 2015 model year. It was based on the sixth generation Legacy model. This model was designed to be more like an outback by combining the strengths of passenger cars and sports-utility vehicles. The body and the wheelbase were larger than previous generations and the Outback went on to receive the Top Safety Award from the Insurance Institute of Highway Safety.
If you want to protect your fifth generation Subaru Outback, then you will need 15.9 yards of paint protection film to completely wrap it. That does not include the windows, lights, or the wheels of the vehicle. For a partial wrap, you will need 5.3 yards of film and that covers one side of the vehicle or the roof.
Whether you own the first generation or the fifth generation of the Subaru Outback, you should take precautions to protect the paint of the vehicle. Not only will your vehicle look great for many years as a result, but the resell value be high if you ever decide to sell it down the line. Most paint protection film have built in self-healing technology that will erase small scratches or scuffs over time. And the best part is that this film is much cheaper than you would expect. It is in fact a much cheaper alternative to getting paint jobs for your vehicle every time it gets damaged. Make the smart choice and switch to paint protection film and worry no more about the paint of your vehicle!
been working good for what im doing
I’m actually in love with the look of it… was kind of a pain in the ass but that’s because I’m new at it lol