Login/Create an Account
2020 Jeep Gladiator I wanted to tint the front door windows to match the factory tint on the rears. I followed their instructions and bottom loaded the film. When it was properly in place on the top and front edges, the film was cut short on the rear edge. It was good on the top but ran away from the gasket by about 3/8” at the bottom. It was cut short and on an increasing angle. This was on the passenger door. The drivers door was a perfect fit. The film went on good and looks good all except for the short issue on the passenger side.. It is a 20% film and matches the factory tint very well.
Most of the corners required trimming and heat but other than that pretty good