Acura RSX Pillar Post Trim

Upgrade Your Acura RSX with Pillar Trim

In the world of vehicle customization, the model specific Rtrim Pillar Trims, 3M Pillar Post Wraps, Rwraps, and Avery Dennison Pillar Post Trim Wraps have risen to prominence for their tailored fit for Acura RSX. These kits are not just for new cars; they can breathe new life into an older model, making it look fresh and well-maintained. The availability of different textures and finishes provides endless possibilities for customization, without sacrificing the fit for your specific vehicle. Rtrim Pillar Trims are renowned for their variety of styles and finishes, allowing a unique customization that complements the specific design elements of Acura RSX. These kits offer a feasible and attractive solution for those looking to enhance their vehicle's appearance without altering its fundamental design elements. Rtrim Pillar Trims, 3M Pillar Post Wraps, Rwraps, and Avery Dennison Pillar Post Trim Wraps are trusted brands in this category, ensuring quality and satisfaction. They offer a simple yet transformative way to customize your vehicle, aligning with the original aesthetics and design.

An Almost Limitless Selection

Whether you're looking to enhance the aesthetics of your Acura RSX or protect its pillar posts, these kits come in a multitude of shades to perfectly match your style. Carbon fiber finishes are another popular choice, offering a sporty look that can transform the visual appeal of your Acura RSX. Beyond the traditional color spectrum, Rtrim’s pillar trim kits provide special finishes like iridescent, which changes color depending on the viewing angle. The finishes not only add to the visual appeal but are also crafted to provide durability, ensuring that the color remains vibrant and intact over time. By choosing Rtrim, you're investing in a product that perfectly balances style, functionality, and durability, even for a specific vehicle like Acura RSX. Rtrim's attention to detail ensures that each color and finish is consistent in quality, reflecting their commitment to excellence. Rtrim’s continuous investment in research and development ensures that they stay ahead of the curve, offering innovative and trend-setting colors and finishes.

Hassle-Free Installation with High-Quality Results

If done correctly, the vinyl pillar trim can last for years, providing both aesthetic appeal and protection to the pillar posts. Utilize the instructions provided with the specific product, as they often contain crucial information tailored to your vehicle type, including Acura RSX. Whether you choose precut or wrap, the first step is to thoroughly clean the surface of the pillar posts using a mild detergent and water to remove any dirt or grease. If the vinyl is designed for a Acura RSX, it will often align naturally with the specific features of the pillars. Allow the vinyl to cool and set for a few hours, following any specific guidelines that come with the product you're using. Patience and precision are essential during the installation, as rushing through the process can lead to bubbles, wrinkles, or misalignment. If you are using precut kits, they will typically be designed to fit your specific Acura RSX, making alignment easier.

Upgrade Your Acura RSX Today

Don't miss out on the opportunity to give your car a fresh and sophisticated look with our quality vinyl pillar trims. Our user-friendly website makes it easy for you to browse, select, and purchase the perfect item for your car. Not sure which product is right for you? Our extensive guides and tutorials can help you make an informed decision. With hassle-free returns and a robust warranty, you can shop with confidence, knowing that your purchase is secure. Join the community of vehicle enthusiasts who have chosen to enhance their cars' aesthetic appeal with our top-notch products. From the comfort of your home, you can browse, select, and purchase the perfect addition to your vehicle, including products specific to Acura RSX. Click, purchase, and prepare to transform your vehicle, including your prized Acura RSX, into something truly special; the road to a more stylish drive starts here!

How to Install Your ACURA RSX Pillar Post Trim

Your Acura RSX has been asking for an epic new look and you can do just that when you add some pillar post tints to it. Rvinyl™ Pillar Trim Kit has made it easier than ever before to install it without having to go to a professional. And the best part is that you won't have to empty your wallet since our prices are affordable. We will show you step by step so you get the look you want as soon as possible.

Guide

• Select Your Vehicle and Precut
• What You Need
• Prep and Clean
• How Not to Install
• Use Masking Tape and Align Properly
• Fold Liner and Use Squeegee
• Remove Liner and Seal the Edges
• Other Methods

Select Your Vehicle and Precut

Visit Rvinyl.com and select the Auto tab and then choose the Pillar Trim tab. Now, select the Acura RSX which will take you to the next page. Here, you will select the product options and a pop up should open. You can select what color and trim you want the pillar trims to be.

There are a variety of colors and styles to choose from so you'll get the color that best matches your vehicle. Make installation easier by adding tools such as a Squeegee, application fluid and a Seal-It Pen to make the installation process easier. We also offer a lifetime warranty for the precut trim. Once you have finished adding items to your cart, you can check out and the items will be shipped to you as soon as possible.

What You Need

• Masking Tape
• Squeegee With a Buffer
• Rapid Prep Cleaner

Prep and Clean

Once your kit arrives, set up your tools near you for easy access. Before you start to apply the pillar trim, clean the pillar of the Acura RSX and Spray Rapid Prep Cleaner and wipe down the pillar and the area outside with the Rapid Prep Cleaner and a towel. Make sure to clean away any dirt, grease, and stains. Spray the cleaner again and wipe down again to make sure it is clean.

If your vehicle has any scratches, then we have good news for you. You can get rid of those scratches with ease by applying a coating of 3m Primer 94 to the surface of the pillars. Apply it evenly and wait five minutes for it to dry up.

How Not to Install

Before you start your installation, the first thing you need to do is to not remove the adhesive liner on the pillar trim because it is there to help keep the pillar trim nice and clean. You don't want to ruin the adhesive by letting your fingers come in contact with the adhesive side. Otherwise you won't be able to perfectly align since it may get damaged. When using the squeegee, make sure to use the buffer side so the pillar trim doesn't get scratched.

Use Masking Tape and Align Properly

Start off by placing 8 small pieces of masking tape next to you so you can grab them easily when you need them. Next, grab the film and align in to pillar with the adhesive still on. Move your hand to the middle of the film and grab two pieces of masking tape and attach them to the bottom so that it stays in place. Make sure the film is properly aligned. Use two pieces of masking tape and place them at the top, about one inch from the very top.

Fold Liner and Use Squeegee

Pull the film back by holding the masking tape and never touching the film itself. Remove the adhesive tape one third of the way, fold it and reapply the masking tape on the top. Use the squeegee and lock the top of the film in place. Remove the masking tape from the top by pulling it low, flat and away from the film.

Remove Liner and Seal the Edges

Now you can remove the liner by grabbing the masking tape that is on the bottom. Lift the film and remove it slowly. Make sure the film is perfectly aligned when you do this. Once you have reached the bottom, use the squeegee starting from the top and going to the bottom. Hold the squeegee on the bottom part of the film as you remove the tap. Make sure the edges are sealed by running your finger on the edges of the film.

Other Methods to Install Pillar Trims

There are many ways to install the pillar trims and we have included some of them so you can find the one best suited for you. Start by cutting the liner with a knife or a scissor instead of folding it in the beginning. This method helps the film align closer with the pillar than the folding method. When cutting the liner, hold the film to the side, which will give you a better angle to remove the liner.

Another installation method that many people turn to is to tape the top and the bottom of the film to the pillar. Next, add a piece of tape to the middle of the pillar trim. Now, remove the bottom tape and place it on the top. Remove the liner from the bottom towards the middle and cut it off. Now, squeegee the bottom section on. After that, remove the top from the top and remove the liner. Lastly, squeegee the top part starting from the middle.

You Have Successfully Installed Pillar Trims

You did an amazing job on installing your Acura RSX pillar tints and they look magnificent. You won't need to use any heat because you it has already been sealed earlier. Installation can be this easy every time by choosing Rvinyl™. And it all comes at a price and convenience that you won't get from anyone else!