Rwraps™ Wood Grain - Elm Vinyl Features

Wood Grain Vinyl Wraps

When you want the naturalistic look of wood grain print but don't want to contribute to deforestation then you will want our Rwraps™ Wood Grain Elm wraps. These wraps are perfect for usage on your car, truck, or SUV's exterior as well as on its interior trim this wrapping film is ideally suited for use on any hard, non-porous surface. And, if you've been looking for a craft film to use in lettering or decals, you've found it! This Wood Grain Elm patterned film works like a charm in your vinyl cutter or Cricut machine. In fact, it works so well that we use it to make Rdash® dash kits. Check out some of the most popular applications for our wrapping films:

• Cars
• Trucks
• Motorcycles
• Scooters
• ATVs
• Jet Skis
• Boats
• Golf Carts
• Guitars
• Refrigerators
• Furniture
• and more...

From the Forest to the Urban Jungle

Whether you live in Nairobi or New York, the semi-gloss look of our Animal Print Wood Grain vinyl will always be in style. Made just for you, the DIY installer, this Rwraps™ Wood Grain vinyl is sold by the foot in lengths of up to ten yards and in three convenient widths (12, 24, or 59-inches) so you never end up with more than you need. Featuring air-drain adhesives, you get bubble-free results each and every time you use it. No fooling around with harsh chemicals, messy slip solutions, and sticky glues. Just clean the surface, heat the film, squeegee it on, and trim away the excess. Fast, simple, and painless - just the way we like it!

Measuring Your Wood Grain Elm Wrap

As you may have noticed above, we have taken the time to show you the scale of the pattern of this film. The image with the man (or woman, we're not sexist) shows how the Wood Grain print looks in a 59" (approximately 5 feet) by 72" (6 feet) sheet. The image is to scale so it should be helpful in determining how the print will look on your car, truck, motorcycle, or anything else you decide to wrap. Please note, however, that the entire pattern is not visible here (in other words, the repeating Orion's Belt pattern is much larger than 5 by 6 feet so you won't necessarily get what is shown).

The 12 by 12-inch tile shows you how you can expect the wrap to look on smaller applications like dElm wraps or skateboards. Again, not every one foot square section will have this exact part of the pattern but it should give you a general idea of what to expect.

Shiny or Subtle, It's Your Choice

All of our Rwraps™ 914 Series films come with a gloss laminate as the default choice. But, since we're all about aesthetic customization, you get the final say. Choose from Gloss, Matte or even No Laminate on your Elm wrap.

Please note that lamination increases the life of your wrap (this applies equally to gloss or matte laminates) and should always be selected for outdoor applications. Unlaminated wraps are only recommended for low traffic, indoor use.

Made for Makers

The popularity of our Wood Grain film  doesn't appear to be waning and you guys are constantly coming up with novel uses for them. These wraps were originally designed with vehicles in mind but you can use them on any hard, non-porous surface you can imagine. No need for messy primers or additional fluids, simply clean the surface of whatever you want to wrap and apply. Use a razor to cut away any excess film and you're done. What could be easier or better looking?