3M™ 2080 Series Rim Vinyl Wraps
- Choose from over 100 different colors and finishes
- Comply™ air-release adhesives for bubble-free results
- Made with Controltac™ technology for low initial
adhesion for quick repositioning
- Multi-layered cast, 3.5 mil thick vinyl film
- 5-8 Year Life Span (varies by film type)
- Sixty inches wide film for easier wrapping
- Clear Protective Overlaminate (Gloss films only)
Rim Vinyl Wrap
3M™ 2080 Series Rim vinyl wrap films give you a look that you can
install on your wheels' rims in no time. Choose from great styles like Color Flip, Carbon Fiber,
Brushed, Matte, Satin and more. Turn heads and head to the head
of the pack while on the track
when you use this premium quality 3.5 mil thick film with Comply™
technology on just about anything with a hard and non-porous surface.
Improved engineering and multi-layer cast production method means this
wrap flows into crevices and around corners with less heat so it's
even easier to work with!
2080 Series Rim Wraps: Made for You
3M™ 2080 Series vinyl wraps are made just for you, the
DIY installer or enthusiast but they're engineered for professional
looking results. There's no need for any special tools or
noxious fluids when you use 2080 Series films. Just follow the
instructions that come with your order and you'll be
ready to apply this pressure-sensitive, heat-activated vinyl in no
time at all. Just clean the surface, add some heat with a hair dryer and squeegee
it on. Buy it by the foot and enjoy seamless results because this
vinyl comes standard in sixty inch widths.
2080 Series Gloss Specifications
- Installation Temperature Range: +61°F
(+16°C) minimum (air and substrate)
- End Use Temperature Range: -61°F to 225°F (-60°C to 107°C)
- Adhesives: Pressure-activated with air-release channels
- Substrate Types: Aluminum, paint
- Recommended Uses: Automotive, Architectural, Marine (above
static water-line), Signage
- Conformability: Flat, compound, convex and concave curves
- Thickness: 3.5 mil
- Application Type: Dry
How to Apply Your Rim Wrap
Getting the premium finish of 3M™ 2080 Series Rim Vinyl Wraps is easy when you follow the right process. Here, we will guide you through a step-by-step process to achieve bubble-free and professional-looking results.
Step 1: Prepare the Surface Before you start, ensure the surface (wheels' rims) is cleaned thoroughly, free from dust, grime, or any oily residues.
Step 2: Measure and Cut the Film Measure the area you want to wrap and cut the vinyl film accordingly, keeping a little extra on all sides for adjustments.
Step 3: Heat the Film Warm the film slightly with a hairdryer to make it more pliable and easy to work with.
Step 4: Apply the Film Start applying the film from one end, gradually moving to the other end. Use a squeegee to smooth out the film and remove any air bubbles.
Step 5: Trim Excess Film Once the film is applied, trim the excess film carefully using a precision knife.
Step 6: Post-Heat Post-heat the applied film with a hair dryer to ensure good adhesion and remove any minor creases or wrinkles.
Step 7: Inspect Your Work Inspect your work and make sure the film has adhered well to the surface without any bubbles or wrinkles.
Tips for a Successful Application
- Work in a clean, dust-free environment.
- Use the right tools like a squeegee and a precision knife.
- Make use of Comply™ technology for bubble-free installations.
- Take your time and work patiently for the best results.
Enjoy a Complete Transformation
Ready to transform your vehicle with the premium look of 3M™ 2080 Series Rim Vinyl Wraps? Choose your favorite finish and order today to experience the revolution in vinyl wrapping technology! Make your mark now!
Remember, if you have any questions or need assistance during your application, we're here to help! Feel free to reach out to our customer service for guidance and support.