Avery Dennison™ SW900 Golf Cart Wraps

Avery Golf Cart Supreme Wrapping Film

Avery Dennison™ SW900 Series Golf Cart Wrap films give you a one-of-a-kind look that will update and upgrade and update your Club Car, Garia or any other brand of cart. The high-gloss finishes can sometimes appear to have a haze or blotchiness that can usually be eliminated with heat. Even the shipping box can create surface impressions that can also be eliminated with heat.

Avery Dennison™ Golf Cart vinyl wraps are made especially for the DIY installer. Use it right out of the box without the need for any special tools, overlaminates or noxious chemicals. Simply read and follow the included instructions and enjoy properties of the EZ air-egress and RS repositionability of this SW900 vinyl. Buy this light blue film by the foot and enjoy seamless results because this vinyl comes standard in sixty inch widths.

SW900 Series Golf Cart Wrap Specifications

• Installation Temperature Range: +60°F (+16°C) minimum (air and substrate)
• End Use Temperature Range: -50°F to 180°F (-60°C to 107°C)
• Adhesives: Pressure-activated with air-release channels
• Recommended Uses: Automotive, Architectural, Marine (above static water-line)
• Conformability: Flat, compound, convex and concave curves
• Thickness: 3.2 mil
• Application Type: Dry (Never use wet application with this film)

Avery Golf Cart Supreme Wrapping Film

Tailored for Various Brands

The Avery Dennison™ SW900 Series is the go-to choice for updating and upgrading various golf cart brands including Club Car, Garia, Yamaha, E-Z-GO, and more. These wraps give a new lease of life to your golf cart, masking any blotchiness or haze with a simple application of heat, even clearing surface impressions created during shipping.

5-Step Installation Guide for Avery Dennison™ SW900 Golf Cart Wraps

Step 1: Preparation

Start with a clean, dry, and dust-free surface. Clean your golf cart meticulously to remove any dirt or residues that might interfere with the wrap's adhesion.

Step 2: Unroll and Cut

Unroll the Avery Dennison™ wrap and cut it to the required size, leaving a few extra inches on each side to facilitate a hassle-free installation. Ensure you have all the necessary tools at hand, including a squeegee and a heat gun if available.

Step 3: Position and Apply

Peel off the backing paper and carefully position the wrap onto the desired area. Start applying from one end, using a squeegee to smooth out any air bubbles as you move along.

Step 4: Heat and Adjust

Utilize a heat gun to soften the vinyl, making it more pliable. This step will help in achieving a snug fit, especially around curves and corners. Adjust the wrap as necessary to eliminate wrinkles or air pockets.

Step 5: Trim and Finish

Once perfectly aligned and bubble-free, trim off the excess material using a sharp, clean blade. Apply firm pressure to ensure the edges adhere well, giving your cart a flawless, professional finish.

Note: For optimum results, it's recommended to install the wrap at a temperature range of +60°F (+16°C) to ensure better adhesion and ease of application.

Transform Your Golf Cart Today!

Take the first step towards a spectacular transformation. Elevate the look of your golf cart with the dynamic and vibrant Avery Dennison™ SW900 Golf Cart Wraps. Get ready to be the center of attention on the course. Order now and start the journey to a more stylish ride!