Avery Dennison™ SW900 Rim Wraps

Avery Rim Supreme Wrapping Film

Avery Dennison™ SW900 Series Rim Wrap films give you a one-of-a-kind look that will upgrade and update your car, truck or SUV's Rims. The high-gloss finish films can sometimes appear to have a haze or blotchiness that can usually be eliminated with heat. Even the shipping box can create surface impressions that can also be eliminated with heat.

Avery Dennison™ Rim vinyl wraps are made especially for the DIY installer. Use it right out of the box without the need for any special tools, overlaminates or noxious chemicals. Simply read and follow the included instructions and enjoy properties of the EZ air-egress and RS repositionability of this SW900 vinyl. Buy this Rim wrap film by the foot and enjoy seamless results because this vinyl comes standard in sixty inch widths.

SW900 Series Rim Wrap Specifications

• Installation Temperature Range: +60°F (+16°C) minimum (air and substrate)
• End Use Temperature Range: -50°F to 180°F (-60°C to 107°C)
• Adhesives: Pressure-activated with air-release channels
• Recommended Uses: Automotive, Architectural, Marine (above static water-line)
• Conformability: Flat, compound, convex and concave curves
• Thickness: 3.2 mil
• Application Type: Dry (Never use wet application with this film)

How to Install Avery Rim Wraps

Step 1: Gather Necessary Supplies

Make sure you have the following supplies on hand:

• Avery Dennison SW900 Rim Wrap Film
• A squeegee
• A heat gun or hair dryer
• A precision knife

Step 2: Clean the Surface

Thoroughly clean the rims of any dirt, grime, or grease to ensure optimum adhesion. A clean surface is key to a successful installation.

Step 3: Cut the Film

Measure the rims and cut a piece of the SW900 film slightly larger than the area you plan to cover. This allows for adjustments and a perfect fit.

Step 4: Apply the Film

Start at one end and gradually work your way to the other, making use of a squeegee to smooth out the film and eliminate any bubbles as you go along.

Step 5: Heat and Stretch

Use a heat gun or a hair dryer to gently heat the film. This makes it more pliable and easier to stretch around the curves and corners of the rims.

Step 6: Trim the Excess

Once you have covered the entire area, use a precision knife to trim away any excess film for a neat finish.

Step 7: Post Installation Heating

Heat the installed wrap once more to ensure that it adheres well to the surface. This also helps in setting the film into any contours or crevices of the rims.

Step 8: Final Inspection

Inspect your work and make any necessary adjustments. Make sure the wrap is smooth, bubble-free, and adhered well to the rims.

Final Thoughts

Transforming the look of your vehicle has never been this easy and rewarding. With Avery Dennison SW900 Rim Wraps, you not only ensure a sleek new look for your vehicle but also protect the rims with a durable and high-quality material that stands the test of time.

Get an Avery Dennison Rim Wrap Now

Ready to redefine the look of your vehicle's rims? Take the leap now with Avery Dennison SW900 Rim Wraps. Click the button below to explore a world of options and step into the future of vehicle customization.

Dive into the Avery experience, where quality meets innovation, and make your vehicle a testament to sophistication and class. If you have any questions or need support, don't hesitate to reach out to our dedicated customer service team ready to assist you every step of the way. Get ready to turn heads wherever you go!