Starting at $14.79

(4.84 / 5) Write a review

3M™ 1080 Series Gloss Black vinyl wraps give you that glossy, piano black style inside and out. Like all 1080 Series films, this Gloss Black film features Comply technology with Controltac™ adhesives so you get bubble-free results every time you use it. Perfect for use as a dash wrap, as a complete exterior vehicle wrap, on watercraft or even in a vinyl cutter. Put your trust in the gold-standard of vinyl wraps and pick up a roll today.

Availability: Availability: In Stock
Ships within 1 - 3 Business Days

Film Size:

Application Razor:

Squeegee:

Application Fluid:

Edge Seal-It Pen:

Installation Kit:

Ceramic Coating:

Update price

Product Options

Add to Cart

Questions? Live Chat with an Agent

Starting at $14.79

Availability: In Stock
Ships within 1 - 3 Business Days

Total: $14.79

Product Options

Add to Cart

Questions? Live Chat with an Agent

Product Details

3M™ Gloss Black Vinyl Wraps

Piano black vinyl with a high-gloss shine
Air-egress adhesives for bubble-free results
Dual cast, 3.5 mil thick vinyl film
7 Year Life Span
Sixty inches wide film for semless wraps
Ideal for vinyl wrapping vehicle interiors and exteriors, watercraft and more

Piano Black Vinyl Wrap

3M™ 1080 Series Gloss Black vinyl wrap films give you a look that you can install on anything. Gloss Black is a high-gloss film that with a metallic flake that sparkles as your line of sight moves in relation to it. Turn heads and grab attention when you use this premium quality. 3.5 mil thick film with Controltac™ technology on just about anything with a hard and non-porous surface. Get the look of a luxury car's paint job for a fraction of the price. Don't believe us, just check out the wrapped Benz above. Oh, and did we mention that it's perfect for use in vinyl cutters too!

Gloss Black Vinyl Made for You

3M™ Gloss Black vinyl wraps are made just for you, the DIY installer or enthusiast. No need for any special tools or noxious chemical fluids when you use 1080 Series films. Just follow the instructions that come with your order and you'll be ready to apply this pressure-sensitive, heat-activated vinyl in no time at all. Just clean the surface, add some heat with a hair dryer and squeegee it on. Buy it by the foot and enjoy seamless results because this vinyl comes standard in sixty inch widths. Use it as a wrap, for crafting or even in your Cricut vinyl plotter-cutter!

1080 Series Gloss Black Specifications

Color: Black
Finish: Gloss
Installation Temperature Range: +61°F (+16°C) minimum (air and substrate)
End Use Temperature Range: -61°F to 225°F (-60°C to 107°C)
Adhesives: Pressure-activated with air-release channels
Substrate Types: Aluminum, paint
Recommended Uses: Automotive, Architectural, Marine (above static water-line), Signage
Conformability: Flat, compound, convex and concave curves
Thickness: 3.5 mil
Application Type: Dry

Send in Your Photos to Save

We want to share a secret with you: not only are you guys our customers but you're our best advertisers too! That's why we've been offering our rebates for over a decade. Interested? All you have to do is submit 5 to 6 high-quality photos of your 3M™ Gloss Black installed in your vehicle or as part of your crafting project, write up a brief review and send it all in to us. Within a few days we'll process your submissions and issue up to a issue your rebate! So, what are you waiting for? Pick up a roll today start turning heads!

Product Fitment

Universal Fitment

Watch & Learn

https://www.youtube.com/embed/Bpz8bDHTyF0

How Much Film Do You Need?
https://www.youtube.com/embed/rwP8wVlvqLQ

How To Wrap Your Hood
https://www.youtube.com/embed/W_l4DtsphfM

How to Wrap Your Fenders
https://www.youtube.com/embed/HWNtseFslqA

How to Wrap an ATV

Reviews

4.84 | 54 Reviews

3M Gloss black 2080
by Brian, North Carolina

4.75

Installation went well. The removable protective plastic film ensures the product can be installed without marring or scratching the vinyl film.

Great Product
by CCT,

4.75

Film looks great, definetly high end product

Great product!
by Wyatt Recob , Roseville, CA

5.00

Thank you for your fast service and fantastic products!

It was ok
by LB,

3.00

I installed it myself. It went on fairly easy on a glass targa top. When I finished up one end, it started to wrinkle. I pulled it back up it wrinkled again. The creases stayed in the vinyl and looked like crap. The vinyl I ordered I thought would have a gloss black look but it looked more dull. After several days being on, the look was not up to my standards, so off it came

by doug,

5.00

looks like a quality stock black paint job

Read all reviews

Reviews | 54 Reviews

Avg Rating

4.84

Out of 5

5 Stars

72%

4 Stars

3 Stars

2 Stars

1 Stars

3M Gloss black 2080
by Brian 4.75

4/1/2024

Installation went well. The removable protective plastic film ensures the product can be installed without marring or scratching the vinyl film.

Great Product
by CCT 4.75

3/21/2024

Film looks great, definetly high end product

Great product!
by Wyatt Recob 5.00

7/16/2023

Thank you for your fast service and fantastic products!

It was ok
by LB 3.00

6/17/2023

I installed it myself. It went on fairly easy on a glass targa top. When I finished up one end, it started to wrinkle. I pulled it back up it wrinkled again. The creases stayed in the vinyl and looked like crap. The vinyl I ordered I thought would have a gloss black look but it looked more dull. After several days being on, the look was not up to my standards, so off it came

by doug 5.00

3/22/2023

looks like a quality stock black paint job

Write a review!

Read all reviews

Questions about this product? Ask us!

Number of questions: 12

Is this product removable?

February 5, 2020 11:17 AM

Hi Anne, Yes! You can remove wraps. We have a detailed article on the process here: How to Remove Vinyl

February 6, 2020 7:48 AM

I want to wrap the trim of my car but I’m not sure if this is the right product to be looking at. If it is, what size would you recommend?

June 22, 2020 9:52 PM

Yaseen, Yes, this would work great for a chrome delete on your Lexus. You would probably need a 24" x 60" sheet and then cut it into slightly oversized 1-3" sheets, apply, heat and trim!

June 25, 2020 5:47 AM

I want to do a chrome delete on a ‘16 IS300

June 23, 2020 8:49 PM

Yaseen, A 12" - 36" by 60" sheet will work well for most trim. It really depends on what you are trying to wrap and if you are doing an interior trim wrap or exterior trim wrap such as a chrome delete project. If you want tot let us know a little more about what you are going to wrap, we could give a little bit more guidance. Hope this helps, good luck with the project and be sure to share #RVINYL

June 23, 2020 9:42 AM

I want to wrap my front bumper of my 2011 Golf (GTI bumper) how much product should I buy? I wanted to buy some extra so I could wrap the whole bumper and have some left over. This would be my first time wrapping anything though

July 20, 2020 1:55 PM

Spoolin’Fool, You are going to need about 10ft to wrap it in a single piece. You will still have material leftover because of its width. Bumpers are probably the hardest to wrap, please take your time!

July 21, 2020 12:57 PM

I’m looking to wrap the 2 mirror back covers. How much would i need ??

August 21, 2020 2:21 PM

Neil, You can probably get away with a 12" x 60" wrap or it maybe easier to have more surface to "pull" the wrap with a 24" x 60" wrap. It may also depend on the size of your mirror. Car mirrors and tow mirrors for trucks are very different in size!

August 22, 2020 8:26 AM

Wrapping external store front mullions. Will you cut theses in 6 inch wide strips x what ever length or yards if purchased?

September 24, 2020 4:08 PM

This film will certainly work on wrapping mullions, assuming they are not wooden. They would probably need to be an extruded aluminum. We do not offer offer that size or at this time offer custom converting.

September 25, 2020 8:20 AM

I’m planning on wrapping my 2002 Toyota Sequoia with this what size would you suggest for the full exterior

November 20, 2020 7:42 PM

Great news, you have an awesome SUV. Bad news, its big and going to need a little extra film compared to a compact! You are probably going to need about 20-22 yards for a full wrap of your Sequoia. This would be enough for areas you may choose to redo and to have some from the same batch for areas you might need to redo the line. We have two great articles you can read to help in your buying decision: Buying Guide How Much Vinyl To Buy

November 30, 2020 2:04 PM

How much would I need to wrap my 2015 Subaru wrx

January 31, 2021 1:59 PM

Kilee, You are probably going to need about 22-23 yards for your WRX. This will give you a little extra film to if you needed to redo the hood or have some left over for interior wraps. We have two great articles you can read to help in your buying decision: Buying Guide How Much Vinyl To Buy

February 1, 2021 3:58 PM

I want to wrap the hood of my Tesla Model 3. How much film should I order? How do I account for the hood emblem?

February 6, 2021 6:10 PM

George, Your probably going to need about a 6' or 72" long wrap. Most customers will remove the emblem and reinstall it after the wrap. We recommend you watch this video below to get a good idea of how to measure for your Tesla's hood wrap project. How to Measure Your Vehicle for Vinyl Wrapping

March 1, 2021 8:42 AM

I want to wrap the chrome trim by the doors on my 2012 g37 sedan. Which size do you recommend?

March 3, 2021 12:58 AM

Gorge, Great question. We would probably use a 24" x 60" wrap and cut it into strips. To be on the safest side a 36" would probably leave you room to redo any of the "chrome delete" without issue.

March 4, 2021 5:58 PM

I’m looking to wrap my roof glossy black on my Mitsubishi lancer 2009 what would I need ?

August 3, 2023 11:08 AM

To wrap the roof of your 2009 Mitsubishi Lancer in glossy black vinyl, you'll need high-quality vinyl wrap (such as 3M 2080 or Avery Dennison), a vinyl application squeegee, a precision cutting knife, a heat gun or hairdryer, isopropyl alcohol and clean microfiber cloths, masking tape, measuring tape, gloves (optional), and a soft cloth or felt-edge squeegee. Start by thoroughly cleaning the roof with isopropyl alcohol and a microfiber cloth to ensure it's free from dirt and grease. Measure the roof, adding a few extra inches on each side, and cut the vinyl wrap to size. Position the vinyl over the roof, secure one edge with masking tape, and peel off the backing while smoothing the vinyl onto the roof with the squeegee, working from the center outwards to avoid air bubbles. Use a heat gun or hairdryer to gently heat the vinyl, making it more pliable and easier to conform to the roof’s curves and edges. Continuously smooth out the vinyl and trim the excess material with the precision cutting knife, making clean cuts along the edges. Reapply heat to ensure the vinyl adheres securely, pressing down the edges for a finished look. Finally, inspect for any remaining air bubbles or imperfections, smoothing them out and ensuring all edges are securely adhered for a professional-looking glossy black roof wrap on your Lancer.

June 22, 2024 6:47 AM

I want to do a chrome delete on a 2018 Jeep Compass. How do you suggest I go about it? Not sure about the badges yet

June 21, 2024 3:41 PM

To perform a chrome delete on a 2018 Jeep Compass using 3M 2080 gloss black vinyl, start by thoroughly washing the vehicle and wiping down the chrome surfaces with isopropyl alcohol to remove any oils and residues. Measure the dimensions of each chrome piece you want to wrap and cut the vinyl into slightly larger sections. Begin with smaller chrome pieces, peeling the backing off the vinyl and carefully placing it over the chrome. Use a squeegee to smooth out the vinyl from the center to the edges, removing air bubbles and wrinkles. Gently heat the vinyl with a heat gun or hairdryer to make it more pliable, allowing it to conform to curves and edges. Carefully trim the excess vinyl along the edges with a precision cutting knife, using masking tape as a guide for clean cuts. Reapply heat to the edges and seams to ensure the vinyl adheres securely and press down the edges for a finished look. Repeat the process for all chrome pieces, including window trim, grille accents, and door handles. Work in a clean, dust-free environment and take your time with each piece for the best results. The 3M 2080 vinyl is forgiving, so you can reposition it if necessary. With careful application, you can achieve a professional-looking chrome delete on your Jeep Compass.

June 22, 2024 6:46 AM

I ordered a 5x15 sheet of wrap with the idea to wrap my hood/roof/maybe trunk on an 2009 crown Victoria. I layed the wrap on the hood only to find out that it was about an inch and a half too short on both sides (horizontally, it was long enough to reach the windshield and grill). I tried stretching it with heat but the film just wrinkled and the panel was lost. I can’t find a 6ft wide 3M wrap, what do I do?

October 27, 2024 11:20 PM

To wrap your car hood in vinyl using two sections with 3M Knifeless Tape, start by thoroughly cleaning the hood to ensure no dirt or grease interferes with the vinyl application. Decide where you want to divide the hood and lay down the Knifeless Tape along this line, making sure it’s precisely aligned. Next, apply the first section of vinyl, smoothing it out with a squeegee from the center outward to eliminate air bubbles, and use a heat gun to help it conform to any curves. Once this section is fully adhered, pull the filament of the Knifeless Tape to cut the vinyl along the line, leaving a clean edge, and smooth it down with the squeegee. Repeat these steps on the other side of the hood, overlapping slightly over the first section. Lay a second strip of Knifeless Tape over the edge of the first section to cut the overlapping vinyl cleanly, then peel away the excess, creating a seamless joint. Finish by using a heat gun to gently warm the edges and the seam, pressing down with a microfiber cloth to secure the wrap and remove any remaining bubbles. This method leaves a professional finish with clean edges and no visible overlap. Please watch this video: Seamless Vinyl Wrap

October 28, 2024 4:25 PM

652374

3M™ Wrap Film Series 1080 - Gloss Black (Replaced by 3M™ 2080)

Starting at $14.79

Starting at $14.79

Total: $14.79

3M™ Gloss Black Vinyl Wraps

Piano Black Vinyl Wrap

Gloss Black Vinyl Made for You

1080 Series Gloss Black Specifications

Send in Your Photos to Save

Watch & Learn

Featured Items:

3M™ Wrap Film Series 1080 - Matte Black (Replaced by 3M™ 2080)

Rwraps™ Gloss - Black

3M™ Wrap Film Series 1080 - Gloss Black Metallic (Replaced by 3M™ 2080)

3M™ Wrap Film Series 1080 - Gloss Ember Black (Replaced by 3M™ 2080)

Reviews

Reviews | 54 Reviews

3M Gloss black 2080
by Brian 4.75

Great Product
by CCT 4.75

Great product!
by Wyatt Recob 5.00

It was ok
by LB 3.00

by doug 5.00

Questions about this product? Ask us!

3M™ Wrap Film Series 1080 - Gloss Black (Replaced by 3M™ 2080)

Starting at $14.79

Starting at $14.79

Total: $14.79

3M™ Gloss Black Vinyl Wraps

Piano Black Vinyl Wrap

.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Gloss Black Vinyl Made for You

1080 Series Gloss Black Specifications

Send in Your Photos to Save

Watch & Learn

Featured Items:

3M™ Wrap Film Series 1080 - Matte Black (Replaced by 3M™ 2080)

Rwraps™ Gloss - Black

3M™ Wrap Film Series 1080 - Gloss Black Metallic (Replaced by 3M™ 2080)

3M™ Wrap Film Series 1080 - Gloss Ember Black (Replaced by 3M™ 2080)

Reviews

Reviews | 54 Reviews

3M Gloss black 2080 by Brian 4.75

Great Product by CCT 4.75

Great product! by Wyatt Recob 5.00

It was ok by LB 3.00

by doug 5.00

Questions about this product? Ask us!

3M Gloss black 2080
by Brian 4.75

Great Product
by CCT 4.75

Great product!
by Wyatt Recob 5.00

It was ok
by LB 3.00