3M™ Brushed Black Metallic Vinyl Wraps 

Brushed Black Metallic Textured Vinyl Wraps

When you want the exotic look of Brushed Black Metallic, you want 3M™ 1080 Series vinyl wraps. This 3.5 mil thick Brushed Black Metallic wrap film lets you easily wrap anything with a hard, non-porous surface. Just remove the liner, apply pressure with a squeegee and add heat with a heat gun or hairdryer. Its invisible, air-channels ensure that no air can get trapped between your wrap and substrate so you get bubble-free results each and every time. 

3M™ Brushed Black Metallic Wraps for DIY Installers

3M™ Brushed Black Metallic vinyl wraps are made just for you, the DIY enthusiast. In other words, there's no need for any special tools or caustic fluids. Just read our one-page instructions and you'll be ready to apply this pressure-activated, thermo-formable film in no time at all. Perfect for use on cars, trucks, SUVs, bikes and boats above the water line, you'll love 3M™ vinyl films whether you're a pro or a first-time amateur.

1080 Series Brushed Vinyl Specifications

• Color: Metallic Black
• Finish: Brushed  
• Installation Temperature Range: 75°F to 80°F (24°C to 32°C)
• End Use Temperature Range: -65°F to 225°F (-60°C to 107°C)
• Adhesives: Pressure-activated with air-release channels
• Recommended Uses: Automotive, Architectural, Marine (above static water-line), Signage
• Conformability: Flat, compound, convex and concave curves
• Thickness: 3.5 mil
• Application Type: Dry

Get a Rebate When You Share

Get the look you want and then get paid for it. All you have to do is wrap something with this 3M™ Brushed Black Metallic vinyl wrap, write up a short review of your experience and then snap five or six high-quality pics of your job. Email or upload them through our site and we'll send you a rebate in the form of store credit. We'll post your pics on our website and make a video montage for our YouTube channel so you get a little bit of fame too. So, don't just sit there, get to wrapping now!